How can we help you?
How can we help you?
The photoelectric exterior sensor for outdoor lights JL-424C is applicable to control the street lighting, passage lighting and doorway lighting automatically in accordance with the ambient lighting level.
This product is designed with electronic circuits with MCU incorporated. Its quicker response with time delay of 5 seconds offers easy-to-test feature while avoiding mis-operation due to spotlight or lightening during night time. Especially, model JL-424C provides a wide voltage range for customer applications under almost power supplies.
| Model No. | JL-424C |
| Rated Voltage | 120-277VAC |
| Rated Frequency | 50/60Hz |
| Rated Loading | 1000W Tungsten 1200VA Ballast@120VAC 1800VA Ballast@208-277VAC 8A e-Ballast@120VAC / 5A e-Ballast@208~277V |
| Power consumption | 0.4W max |
| Operate Level | 16Lx On 24Lx Off |
| Ambient Temperature | -30℃ ~ +70℃ |
| IP Grade | IP65 |
| Overall Dimensions | JL-424C: 85(L) x 36(Dia Max) mm
|
| Leads Length | 180mm or Customer request (AWG#16) |
| Fail Mode | Fail-On |
| Sensor Type | IR-Filtered Phototransistor |
| Midnight Schedule | Available per client’s request |
Disconnect power, remove junction box cover, place the SWITCH in knockout hole and fasten with locknut.
Wire according to the diagram in right hand.
Do not install the switch with the Photocell facing artificial or reflected light. This will cause the unit to cycle on and off at night.
It is normal for the SWITCH to take several minutes to turn off when first installed.
To test “turn on” during daytime, cover its eye with sliding the metal strip mounted.
Do not cover with finger because light traveling through fingers may be great enough to keep the switch open.
Test will take approximately 2 minutes.
Copyright Longjoin Electronics Co., Ltd. Shanghai 2008. All Rights Reserved
沪ICP备2022000883号-1
